Focus ST225

Below are the tune files programmed into the iMap that you will be able to choose from. 

Performance+ (Stage 1)
A good balance of power and economy suited for all fuel types and vehicles which are standard. This is the best map for long journeys. Performance Plus Dyno Graph.

Race+ (Stage 1)
This aggressive tune delivers maximum boost and our signature shove in the back, ideally suited to standard cars or basic mods such as induction or intercooler upgrades, not recommended for use with exhaust mods such as down pipe and de cat, best suited with super unleaded fuel. Race Plus Dyno Graph.

Dsci (Stage 1) **most recommended Stage 1 
The characteristics of this tune are “Race Plus” but with a more progressive and linear boost delivery building to and holding a higher peak for longer. This map is our customer favourite Stage 1 remap for all round performance – designed for customers running standard or very basic modifications. This map should be ran with fuel that is 97ron or higher. DSCI Dyno Graph.

Mod B (Stage 2)
This tune file is a good entry level Stage 2 designed to work for vehicles running a few bolt on mods such as an upgraded Intercooler, Cold Air Induction Kit, Cat back exhaust system. Mod B has  a characteristic second boost stage at 4000rpm. This map should be ran with 97+ron fuel.  Mod B Dyno Graph.

ModB+ (Stage 2)
An evolution of the tried and tested “ModB”, but with a few new tweaks, increased boost at high rpm and holds boost for longer. This map should is also designed to work for vehicles running a few bolt on mods such as an upgraded Intercooler, Cold Air Induction Kit, Cat back exhaust system. However, this map should be ran with 98+ron fuel. Mod B Plus Dyno Graph.

ModC (Stage 2)
After a year of development, we give you “ModC” with several enhancements above the historic “ModB”. This map comes onto boost very early in the rpm range and manages to hold boost to the red line very well. Ideally suited for cars with Induction, intercooler and full 3″ turbo back exhaust (but can work with the stock down pipe and stock cat). A popular map for track days and dyno days. This map should be ran with 98+ron fuel. Mod C Dyno Graph.

Mod X (Stage 2/3) **most recommended Stage 2 
The Mod X name has become iconic across the entire ST tuning industry (and for good reason). This is definitely our most popular map which was conceived from the knowledge we gained tuning the RS MK2, we imported several table changes from the RS MK2 calibration into Mod X and created a truly legendary map.

This tune file is only for cars with upgraded induction kit, Stage 2 or above intercooler, 3″ turbo back exhaust system and 98+ron fuel.  Other modifications recommended for this set up are the Forge Actuator and Forge Recirc. This map certainly has the X-Factor!! Mod X Dyno Graph. This map will remove the Mil light generated from an aftermarket exhaust changes and should be ran with stock injectors only [not 440cc or 550cc injectors]

Mod XRS (Stage 3)
This is the pedigree of Mod X but calibrated for the larger Bosch 440cc injectors found in the RS MK2, with modified boost curve and throttle mapping; Mod XRS is the top tune for cars with full bolt on mods and RS injectors – usually making in excess of 320+ Bhp. A Mod XRS vehicle should be running the following set up;

Induction kit
Intercooler (Stage 2 of higher)
3″ Turbo back exhaust system
Forge Actuator
Forge Recirc
Bosch 440cc injectors [not 550cc or stock injectors].
98+ron Fuel
[This map will also remove the Mil light from exhaust upgrades]

Focus ST250 including Face Lift

Below are the tune files programmed into the iMap that you will be able to choose from.

Performance+ (Entry Stage 1)
Ideal for standard cars running std 95 octane fuel, this map delivers a good balance of extra power and torque. A customers favourite for commuting or cruising due to the improved economy.

Race (Stage 1)
Ideal for standard cars running std and super unleaded fuel, delivers an increased level of power compared to Performance+. Ideal for spirited driving and every day use alike.

DS-Ultima (Stage 2/1 ) **most recommended Stage 1 and Stage 2 map. 
Our optimum tune for all out performance to be run with 99 octane super unleaded fuel only! Best suited for cars with bolt on modifications such as Cold Air Induction, Intercooler and 3″ turbo back exhaust (Sports cat or De cat).

However, this Tune has also undergone rigorous testing and development to ensure it can also to work on a vehicle with standard or basic modifications. When tested on a standard Pre-Face lift car with just a panel filter we saw 287Bhp and 393FtLb of torque as shown in this dyno graph. ST250 DS Ultima Dyno Graph

When this map is teamed up with full bolt modifications such as our Full cold air induction, Intercooler, Turbo back exhaust, Forge Recirc – we achieve up-to 300Bhp peak power with even more impressive gains over stock in the mid-range.

Mustang V8 S550

Below are the tune files programmed into the iMap that you will be able to choose from.

Race 99
The optimum tune for your V8 Mustang, created in collaboration with the top calibrators from SCT USA the word  leaders in Mustang tuning. This tune is ideally suited for the standard car set up, on our Dyno our std test car running Shell V-Power made 411Bhp & 365FtLb of torque. After flashing the car with the Race 99 tune we made an impressive 442Bhp and 396FtLb. We have ironed out several flat spots, improved throttle response and make gear changes much sharper when punching the throttle. See independent customer testimonial below..

Race 99 Induction
This tune file is based on the Mighty Race 99 map and  has been carefully calibrated to work with the JLT cold air induction kit. When performing our tests on a std car runnng Shell V-Power and the JLT intake only, we made an impressive 452.7Bhp and 410FtLb of torque. This is an addittional 11Bhp and 14FtLb of torque with the cold air filter and revised map.

Race 99 vs Standard Dyno Graph

Mustang Ecoboost

Below are the tune files programmed into the iMap that you will be able to choose from.

Race 99
The Ecoboost Mustang certainly looks the part but it does lack that extra grunt which makes it a muscle car. With the Race 99 tune we managed an increase of over 40 Bhp and 70 FtLb of torque which completely transforms a good car into an exciting car. Race 99 is best suited for super unleaded fuel but can be used on regular octane too.

Race 99 Induction
This tune is specifically calibrated for the JLT cold air intake system and gives and even greater power increase due to the direct delivery of unrestricted cold air to the turbo, vital in any high performance application. On our test car we managed to increase our power by 51 Bhp and just over 80FtLb of torque making this thoroughbred a true animal with the induction noise to suit.

DS Ultima

The latest and top tune file currently available for the Mustang EcoBoost. After our huge success in developing tune files 2.3 engine for the Focus RS MK3, We have transferred pivotal information into the development of the 2.3 ecoboost mustang. Using recently found tables, we have been able to extract serious bhp and torque gains, creating a remap worthy of the “DS Ultima” name heritage.  Even more improvements of bhp and torque over the Race 99 at every stage, pick up, mid range and top end power.

Fiesta ST150

Below are the tune files programmed into the iMap that you will be able to choose from.

Race+
This tune file is ideally suited to the standard car set up and works with std 95 Octane fuel, if super unleaded fuel is used the map will make more power and offer better economy in the cruise. Usually good for an extra 15Bhp, and 12FtLb of torque with no other modifications. Improved acceleration with the adjustment of the factory torque limiters greatly improved 1st and 2nd gear acceleration and irons out the throttle delay. Race Plus Dyno Graph

Track
This tune file is based on Race+ but has all the ECU torque control and tip in intervention disabled so ideal for track racing. This tune is best suited for standard cars running super unleaded fuel. It produces similar power outputs to Race+ but disables any interference from the ecu relating to torque. A practical feature for track days is the “Track Map” holds the rpm up when changing gears to eliminate delay during rapid acceleration.

Hyper Race+
Our newly created map best suited for 99 Octane super unleaded fuel, and designed for cars running common bolt on mods including Cold Air Induction Kit, 4-2-1 Branch exhaust manifold with full system, Race cat or de cat. This set up with std cams usually makes a proven 185bhp to 190Bhp. This HyperR+ map is truly a customer favourite and always produces excellent reviews. CLICK HERE FOR DYNO GRAPH 

For those running or planning to run bigger camshafts, we developed a Hyper Race+ (Ph2 cams) map which has been specifically designed for the Newman Ph2 cam set up. This can be purchased separately from HERE. Consistently making between 200bhp – 215bhp.

Fiesta ST180

Below are the tune files programmed into the iMap that you will be able to choose from.

Race 95 (Stage 1)
Dreamscience finally release a tuning solution for your ST-180 Fiesta, the Race 95 map as the title suggests is for standard 95 octane fuel and works well on cars that are standard or with partial modifications such as panel filter, cold air induction kit and cat back exhaust.

This map offers an increase in torque of over 45FtLb and over 30Bhp in the mid range and picks the peak  power on our test car to 202Bhp and 245FtLb of torque, if you want that extra power we suggest you fill up with V-Power 99 and run the Race 99 tune. Race 95 Dyno Graph.

Race 99 (Stage 1)
This tune file is based on the Mighty Race 95 map and  has been carefully calibrated to work with 99 Octane fuel  like Shell V-Power. This map really isn’t for the faint hearted as we have edited the torque limiters in the lower gears, refined the power delivery so the car will pull all the way to the rev limiter. This tune can be used on standard car set up or those with panel filter, induction kits and exhaust modifications including turbo down pipe.

Our test car was completely standard with V-Power fuel and consistently ran just over 212Bhp peak and 268 to 272FtLb of torque making this one of the strongest remaps for the otherwise standard car on the market. All tests were done on our 6 month old Mustang 4WD dynamometer in 9 degree ambient temperature.When giving this tune to several test customers they were all blown away to the power delivery all through the revs on the road, a must have for any ST-180 owner. Race 99 Dyno Graph.

DS Ultima (Stage 1+ / Stage 2)

The Dreamscience Stage 2 remap now signed off and complete. To experience the full fury of this map, we advise having after market modifications fitted such as an intake,  full exhaust and inter cooler.

This map will remove the mil light so it can run with a race cat or de cat. DS Ultima has been designed to not only improve peak power and torque figures across a dyno graph, but to maximize performance at lower RPM and the mid range. With supporting mods this map made a total of 220bhp and 288Ftlbs of Torque on our dyno.

Focus RS MK3

Below are the tune files programmed into the iMap that you will be able to choose from.

DS-Ultima (Entry Stage 1) 
This tune file has evolved from our early Race99+ tune and gives more low down power / torque, holds a flat torque curve in the middle keeping you pinned to your seat and you still get that little bit extra up top! This tune file is only for super unleaded fuel or equivalent to UK 99 octane such as Shell V-Power. Peak power is slightly up on our previous Race99+ tune, the most impressive part on DS-Ultima is the extra 20+ bhp throughout the mid range keeping your acceleration uniform from 2000 rpm to 6000rpm.

DS Ultima 2 (Stage 1 with mods) 

Our first tune designed to run with an upgraded down pipe 3″ with sports cat, plus the addition of a Cold Air Intake. (CAIS) This map is recommended to run with 99octane Shell V power or Tesco Momentum but can also be ran with 97octane fuel. With these modification fitted Our DS-Ultima-2 tune file gave an increase of 26Bhp throughout most of the rev range above 2500rpm and just over 31FtLb of torque more than DS-Ultima.

This map (like the others maps listed) has many built in safety functions which are thermally integrated, the map produces it’s full potential only after the oil temperature is in the normal operating range. The Mil light will not come on for de cat or sports cat and to get best acceleration we recommend Sports mode with the traction turned off.

DS-ULTIMA-2+ (Stage 1+)  ***most recommended

DS Ultima 2+ is the most popular map offered to RS customers who are still using the stock downpipe and catalytic converter. This map really sets the standard for tuning options for the MK3 with nearly 12 months of development to finalize and release to the public. This map has been extensively tested on the Road, Dyno and Track!

This map is ideal for a RS that is running usual bolt on hardware (i.e. intakes, intercoolers, exhausts) but is also recommended to those running stock hardware. Yes that right, DS Ultima 2+ can be run with standard mods! A Standard RS MK3 can expect to see a substantial mid range increase of up to 45bhp & 80FtLbs Torque. Peak power gains are  subsequently shy of the incredible mid range increase with around 30bhp more than stock (with 99 octane fuel). To help achieve high bhp figures, this map can be complimented by an aftermarket downpipe, intercooler,  cold air intake, Bigger Boost pipes and 99ron fuel.

Please note – This map can also be ran with 97octane fuel.

For an independent review of DS Ultima 2+  please see the link: DS Ultima 2+ Review

DS Ultima 3 (Stage 2) ***most recommended when running 3″ downpipe**

Dreamscience are delighted to announce the release of our latest tune for the RS MK3.  We have been working on this latest tune for several months and are delighted with the overall performance, power output, reliability and most importantly driveability.

The test vehicle reliably and consistently produces around 405Bhp and just over 430FtLb of torque, this map as can be seen from the graph (Dyno Graph) achieves its peak power at 5350 Rpm and holds over 400 Bhp thereafter making it a bit of an animal when racing or making high rpm gear changes.

Don’t just take it from us, check out this map in action drag racing against various competitors. [ULTIMA 3 HEAD-TO-HEAD RACE PREVIEW] OR [FULL 40 MINUTE HEAD-TO-HEAD DRAG RACE BATTLE FOOTAGE]

The torque curve has no crazy spike and is controlled as can be seen from the graph we hold over 425Ftlb of torque from 2500 rpm to 4500 rpm with a flat torque curve and the drop off is only slight so the car always feels progressive and like it’s continuously pulling hard!

You will notice an over-boost feature with this map when driving that activates above 4500 rpm so you never have the feeling that the car is letting off power, ever! The small humps that can be seen in both the stock map torque curve, and the Ultima 3 torque curve, are a safety feature as we run to a load target / limit same as your stock file, this ensures that under harsh conditions your car will still perform safely and within tolerance.

DS Ultima 3 Dyno Graph

This Ultima 3 tune must only be run with 99 octane fuel in the UK, or 98 Octane in Australia, and ideally 98+ octane in other European countries who have access to higher octane fuels.

Minimum modification requirements for optimum performance are

• 3” Downpipe with sports cat, Race Cat or De Cat (Down Pipe Link)
• Cold air intake system (Link)
• 99 Octane fuel

Additional modifications which complement the map and produce extra gains

• Upgraded intercooler (DS Intercooler link)
• Big boost pipe kit (Link)
• 3” Cat Back exhaust system (Link)

Planning on more power? (STAGE 3)

An (optional) STAGE 3 map for iMap customers can be purchased HERE  making (425bhp / 430ftlbs). **Please Note – this stage 3 map is not included with the price of the iMap and would require purchasing separately for + £100.00.

Focus RS MK1

Below are the tune files programmed into the iMap that you will be able to choose from.

Race+
Taking “Race” further. This tune gives rapid boost and our signature shove in the back as your car comes on boost. Our demo RS MK1 made around 212bhp on our dyno as standard. Once we uploaded the Race+ software it consistently made between 245- 250bhp!

Race
A slightly revised version of Race+ but certainly a map not to be underestimated! This tune is considered a high torque map compared to the Track map with a much more punchy delivery, plus with a mid-range increase of up-to 40bhp (with 99ron fuel), it makes overtaking completely effortless with substantial increase of power at every section of the rev range.

Track
This Track ready map boasts a controlled linear torque curve, still offering a healthy increase of power similar to the Race tunes. However, more suited to those with access to 98+ron fuel looking for a track day map – due to its high power but controlled torque and boost to help keep temps down.