BIG Mouth Ram Air Kit (Velossa Tech) – 2015-2018 Focus RS

Dreamscience are proud to be the European distributors for Velossa Tech products. This kit is designed to scoop up, pressurize and feed fresh air into your stock air box. Improving performance, throttle response and intake air temperatures.

Designed specifically for the new Focus RS platform. State of the CFD simulated ram inlet designs are standard for all BIG MOUTH products.

Use the forward motion of your car, turn that motion into pressure. Increasing the inlet pressure to your turbocharger has profound effects on performance. Increases in air mass flow, reduction in waste gate duty cycle and reduced inlet and charge temps are some of the benefits of running a properly designed inlet. This set up is designed to receive a direct feed of cold air from outside the car than consume hot air under the bonnet that is heated by the engine.

The BIG MOUTH ram air intake will work with your stock Ford Focus RS intake system or any aftermarket intake system.

This Focus RS Velossa Tech BIG Mouth is available in the following colours;

• BLACK
• WHITE
• YELLOW
• NITRO BLUE
• RED (Gen 3 Velossatech)
• OTHER

If you select ‘OTHER’ – Please add in the ‘NOTES’ section at checkout the colour you wish to choose.

Please Note (depending on stock delivery times) a colour not currently listed in the drop downs, or a flare shape that is listed as ‘built to order’ usually have a several week lead time

CLICK HERE to see The Science behind the Velossa Tech BIG Mouth

Fitting

We rate this item as 4.5 out of 5 for fitting difficulty, with 1 being the easiest and 5 most difficult. To fit this product the bumper must be fully removed and a modification has to be made for the scoop to fit. Full detailed fitting instructions are included with this product. See link below for fitting instructions;

RS-BIGMOUTH-R2

We also offer a full fitting service at our Dreamscience HQ in Hull, UK, priced at £125.00. This must be selected with your order, and we will then contact you to arrange a suitable time. Please note if you require this service then you must choose collection as your delivery method when going through the checkout or you’ll still be charged for delivery!

Shipping Information:

For any DIY fitting advice please call our tech helpline to speak to our Qualified technicians on +44 1482 224433. Or email us on Sales@dreamscience.co.uk

Features

• MAXIMUM FLOW, THE FASTER YOU GO, THE MORE AIR YOU GET
• PREVENTS BACKWASH OF HOT RADIATOR AIR GETTING INTO YOUR INTAKE SYSTEM
• LARGE RANGE OF COLORS AVAILABLE.
• MANUFACTURED USING THE LATEST 3D PRINTING METHODS.
• DESIGNED TO GIVE AN AGGRESSIVE FINISH