Forge Motorsport Recirculation Valve ST250

This is a piston design recirculation valve that is a direct replacement for the original fitment. This valve gives greater longevity than the diaphragm (OEM) valves but also benefits from its ability to be fitted with different springs when the boost pressure has been increased or the engine has been modified. To ease installation the top or vacuum connection is angled.

The idea of these is that the standard valve on the car is suitable for standard boost settings however once you get a remap the boost pressure often increases resulting in the standard diaphragm in the dump valve to collapse as it is not designed for anything over standard boost pressure, this in turn will cause a boost leak. With this Forge dump valve it is a much stronger unit and will with stand boost pressures of over 2.5 Bar.

The forge Recirculation will increase the Turbo-Chatter when used with an open intake kit. Reduces the Recirculation noise when cruising too.

Dreamscience Chose the Forge Recirculation Valve over all other competition due to it working the best out of all. Some other alternatives do not suit the ST250 engine and it’s PCM. Other Valves can leak air under vacuum/idle or cruising. This causes fueling issues.

*NOTE BOLTS ONTO TURBO TO REPLACE ORIGINAL VALVE*

 Shipping info: This product is available for shipping inside the U.K and Internationally. Shipping times may vary. Extra charges may be incurred if your locations is considered Remote. If this is the case a member of our team will be in touch shortly after you have completed your order.