Thermal Encapsulated Downpipe / Sports Cat. [MK4 FOCUS ST]
The Dreamscience Turbo Downpipe (s) are now using Thermo-Encapsulation. (Where specified). The Encapsulation technology used is the most adaptable metal encapsulation system for insulated exhaust and charge air pipes, with a lightweight outer shell made from embossed stainless steel foil that’s just 0.4mm thick. This is formed into shape using in-house designed and produced tools and jigs.
Specified insulation material is cut and applied directly on to the pipework provided. The formed stainless steel shells are then fitted around the insulation and securely welded together and on to the pipe, forming the protective outer covering.
This insulation will reduce Exhaust temperature emission and stop heat soak to all surrounding components by up to 80%!!! This will help reduce intake temperatures, and improve Engine performance and reliability. We cannot encourage the use of this option enough.
Not Road Legal.
The Dreamscience Thermal Encapsulated Downpipe / Sports Cat. [MK4 FOCUS ST] is made from mandrel bent 304 grade aircraft spec stainless steel. All systems have been designed and manufactured by engineers in the U.K with the catalytic convertors sourced within Europe. We have equipped each system with a threaded boss for the standard oxygen sensor.
When developing this component, we made sure we achieved several key factors. Optimum Performance; Sharped Sound; A High Quality Finish. We found this particular replacement makes one of the biggest differences in performance when changed, as this the most restrictive part in the standard exhaust system. Therefore, this upgrade allows the turbo to spool greater and faster, thus increasing acceleration and power. This will also improve your ST’s throttle response and the overall torque output.
Take a look at the Full Dreamscience Exhaust system here. Dreamscience Mk4 Focus ST Exhaust. – YouTube
Shipping info:
This product is available for shipping inside the UK, Europe and the rest of the world. Shipping times may vary. Extra charges may be incurred if your locations is considered Remote. If this is the case a member of our team will be in touch shortly after you have completed your order.
Fitting info:
Our Experienced Techs will take good care of your ST whilst it is with us. We Follow a strict procedure for each job to ensure a high level of quality is delivered.
This Procedure is below:
– Protect Vehicle Steering wheel with Cover.
– Protect Seats with Cover.
– Pre-work test Drive to fault find before we carry out work.
– Pull in, lift and Strip Vehicle.
– Book out parts and Fit.
– Road test, check over.
– Final Clean down and Handover.
Technical Assistance.
For fitting tips and advice please call our technical helpline on +44 1482 224433 to speak with one of our Qualified Technicians or email in on info@dreamscience.co.uk
Read More
