Dreamscience Stage 1 ST225 275bhp
The Dreamscience ST Stage 1 Tuning Upgrade kit has been specifically selected to include the best components to tune your Ford Focus ST225. We can also offer a rolling road session for an extra £100.00.
What’s included in this Package?
Dreamscience Cat Back Exhaust.
3 inch stainless steel Cat Back with 4 inch slash cut tips either rolled in or hard edge for Ford Focus ST225
The Dreamscience cat back is a 3″ diameter mandrel bent system with branded inline silencers and come with the choice of two tips styles. This is very different to a conventional Focus ST system as it does not use the traditional large silencer, with these fitted it allows the exhaust gases to exit the engine quicker.
After customer feedback, we have also taken the 2 rear in line resonators and increased their size from 4” diameter to 5” diameter, the effect of this is a softened and reduced cabin noise, especially in the cruise, while maintaining the aggressive roar and growl at the rear and outside of the car.
The Dreamscience cat back gives a sporty sound that is not intrusive as it is subtle when in the cruise but gives an aggressive growl when full throttle is applied.
Resonated System
This system gives a very sporty sound that is not too intrusive or excessive, it is tasteful when in the cruise, however an unmistakable aggressive roar when full throttle is applied. This is the most popular system ordered due to the tuned nature of the system and all round benefits offered.
Non Resonated System
This system is not for the faint hearted and has almost no silencing. You will experience drone and vibration transfer to the cabin in the cruise, and people will hear you coming from another post code away. Ideally suited for track days or short journeys or general anti social behaviour. Half of those who order non resonated contact us within a few weeks and ask to buy the resonated section as they feel its too loud.
The Dreamscience dsci ST225 CAIS (Cold Air Induction System) is truly a revolutionary Intake designed to maximise the performance of your ST225 2.5L engine. The dsci kit is manufactured from High quality aviation grade aluminium and powder coated black. There is only one internal weld on this kit and for the most part a specialist mandrel bending machine has been used to form the turns and bends in the pipes. This kit also has bevelled ends which offers better grip to the joining silicon hoses and boasts a venturi system which helps accelerate the air to the turbo inlet while providing a unique turbo note.
The Dreamscience induction kit ticks all the boxes for a quality induction kit with a uniform pipe size throughout (76mm), no 90 degree bends, no expansion chamber like in some kits which can cause part throttle flat spots and hesitation, and no part of the kit is between the radiator and block so heat soak is not an issue. This kit was designed by engineers with PHD level qualifications in physics and is intended to maximise the performance of your Engine and be the most efficient system for supply unrestricted cold air to the Turbo with the shortest and most direct route.
The lower pipe has Dreamscience Drycharger Air filter, rated up to 600bhp Bhp, This air filter is a 360degree entry filter. No end plates or base plates to restrict airflow. The Drycharger doesn’t use oil, we can add a dirt retention coating for those living in particularly dusty surroundings non oiled filter.
The cone gets a direct cold air feed from the lower right grill and is still more than high enough to avoid any water contamination.
This kit is suitable for standard, partially and fully modified cars and in all cases will make a noticeable difference to the overall performance and sound of the engine.
The dsci ST225 Induction Kit is very similar in design and functionality to the official Focus RS mk2 Induction as designed by Team RS…
One Shot Tune file.
This is a File only option to tune your PCM, this remap will dial in all the new modifications fitted to your car. The “One shot map” option included within the price requires the vehicle to be mapped at DSHQ (Hull, HU3 4RB). If you wish to have this Stage 1 package delivered rather than fitted, we shall send the cat back, induction kit and any additional extras (if any) via our courier services. However, the vehicle will require to come to our DSHQ to upload the Stage 1 One shot map. If this option is not possible due to distance issues or something similar, we offer the upgrade to Dreamscience iMap handset for an additional £200. The iMap contains Stage 1 to Stage 3 software pre-loaded which allows you to upload the tune file yourself. Click on the iMap link for more information. Stratagem iMap Link
Optional parts to add to the Package.
- Ceramic Black Exhaust tips.
- Dreamscience iMAP handset.
- Rolling Road.
- Optional Oil and Filter Change
Select our optional oil and filter change below to finish off your Dreamscience Stage 1 performance package. With the modifications carried out it’s obvious that the standard oil and filters fitted to your car will not suit the power increase. We’ll supply and fit superior grade oil and filters to help protect your engine under the new higher performance levels you’ll be achieving.
Please note that as this is a fitted optional extra you should only add this option if you are intending to bring your car to our headquarters for fitting. - Optional Deluxe ECU Mount
While fitting your DS Stage 1 Kit why not add a fully compatible RS mk2 ECU Mount?
This ECU Mount gives the engine bay more of a OEM/tidy look, whilst protecting the delicate ECU from any water ingress.
